LetsGo luggage carrier : new rear light holder

In its third version, the LetsGo carrier has a new rearlight support, more easy to install and with a better cover of the rear light.

More explanations >>

First, mount the rear light on the support :
- Insert the guide into the large hole of the support.

- Screw the rear light on the support with the original screw. (Torx T15)

- Do the same on both sides.
- Insert the cables into the corresponding hole.

Then, mount the support on the frame of the carrier :
- Screw the 2 bolts (M8 key) on each side.
- Insert a little black plastic tubes on each bolt.