Letsgo: How to (re)install an elbow reinforcement

Here is the procedure to install an elbow reinforcement on the luggage carriers Trigo MultiGo or LetsGo
Read more >>



Place a nut at 1.5 cm from one end of the threaded rod and the other nut in the middle.

Insert the B end in a hole of the elbow.

 Present the A end facing the other hole

Insert the A end into the hole until the nut touches the wall of the elbow

Hand tighten the nut side B

Tighten very firmly with a spanner the nut side B

Place the cover

That's it !

Aucun commentaire :

Enregistrer un commentaire